Scanning Electron Microcopy can be that easy!   The EasyProbe is a favorable combination of a Tescan VEGA SB SEM and a selected and fully integrated energy dispersive X-ray microanalyser, specially designed for everyday use. Easy Usage A high priority when designing the system was easy usage. The original One-Touch EDX microanalysis toolbox is fully integrated into the EasySEM™ controlling and imaging software. This brings quantitative elemental composition resultsdirectly into the live SEM image only by one touch. A high level system automation and self-diagnostics, running in the back ground, assure high quality results, even for inexperienced users.   SB Internal Diameter Ø 160 mm Door Width 120 mm Type eucentric X 45 mm mot. Y 45 mm mot. Z 27 mm man. Z’ 6 mm man. Rotation 360° mot. Tilt -90 bis +90° man. The VEGA EasyProbe can only be ordered as Uni-Vaccum (variable pressure) variant and is suitable for investigation of different kinds of samples including non-conductive specimens in uncoated state. Electron gun Tungsten heated cathode Resolution 3,0 nm at 30 kV Magnification 4,5 to 100.000 Accelerating Voltage 200 V to 30 kV Probe current 1 pA to 2 µA Chamber vacuum (HV-Mode) < 9*10-3 Pa Working modes Resolution, Depth, Field, Wide Field, Rocking Beam Installation requirements 230 V / 50 Hz or 120 V / 60 Hz, 1300 VA, No water cooling Wide Field Optics™ and In-Flight Beam Tracing™ are trademarks of Tescan, a.s. Windows™ is a trademark of the Microsoft Corporation USA and other countries.